For a long time, I used my indoor Nest Cam to film through my window. It was a makeshift outdoor camera supplemented by my Ring Video Doorbell. So it should come as no surprise that when Nest Cam Outdoor launched, I jumped at the opportunity to buy it. Since then, my search for an outdoor solution has continued to Canary Flex, Ring Spotlight Cam, Arlo Pro, Arlo Pro 2, Blink XT, Nest Hello, Reolink Argus, Argus 2, and a few that did not make the honorable mention list.
3. Both Arlo and Nest have a lag from time to time. There are moments when I pull out my phone to stream Nest and it just spins and spins. I have to hard close it and then reopen the app. When it’s working, I can usually access footage in about 4 seconds. Arlo takes about 8 seconds to wake. There is also a 4 second difference between what you see on your phone and what’s happening in real life. WiFi will really depend on the speed and quality of your internet connection at home. I would suggest performing a quick test to see your current upload/download speeds.
Hey Scott, sorry about your car. Under shortcuts, you will find the video reviews. For Nest, night vision is shared at minute 1:43 and keep playing for just a moment to see night vision from Ring. During the Arlo vs. Canary video (the third video shown), skip to minute :54 to see night vision from Canary and keep playing to see a side by side comparing it to Arlo. To me, they are all about the same. I’ve found that the best night vision comes when you leave the lights on. I actually have automated lights on my porch, and they turn on at sunset and back off at sunrise. Integrating the cameras with a smart home system: I’ve tested Arlo Pro with SmartThings, I wasn’t a fan of that. It actually changes the mode to a new mode called SmartThings. I prefer geofencing mode. Ring I’ve tested using IFTTT, but I haven’t tested it with SmartThings.
The rest of the kit remains relatively standard. The Ring Alarm entry sensors are about a quarter-of-an-inch bigger than SimpliSafe's sensors and don't perform double duty like Nest's large sensors, which also sense motion. They're easy to install with the included mounting hardware and 3M-branded sticky tape, but they seem unnecessarily large and were hard to place so that the magnets would meet each other on both my front door and the back sliding door.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.
Arlo Go is yet another Arlo camera. It’s an Arlo Pro plus 4G. The big catch is that a cellular plan via Verizon is needed as it doesn’t work with WiFi. It does come with 15 data minutes to send 15 minutes worth of video to the cloud for free. Once you’ve used those minutes, you’ll need to buy more time. Data plans start at $4.99/month for 15 data minutes and go up to $32.99/month for 225 data minutes. Arlo Go sells for $429.99 on Amazon or 399.99 from Verizon ($349.99 if you sign a 2-year contract).

Once the base station is online and your account set up for monitoring, the rest of the devices in your starter kit are automatically identified in the Ring app and you can set them up one by one. With each one, you can provide a name and room location to help identify the accessories in notifications and the app. With the keypad, you'll set up an access code that lets you arm and disarm the alarm, and you can set up different codes for different people. As you set up each motion detector and contact sensor, the app will have you test each one to ensure that they're probably detecting events.
Ring's updated app (which will roll out to everyone in the coming weeks) brings lots of improvements for those invested in the ecosystem. You have quick and easy access from the main screen to the alarm features, as well as a glimpse of what your cameras are seeing. Things can be a little slow to load, depending how much equipment you have, but most of the time it works great.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere.  Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
The Spotlight Cam performed well in our tests. Daytime video was highly detailed with rich colors, while black-and-white night video showed good contrast and appeared sharp out to around 25 feet. The motion sensor always generated a push alert and followed my schedule without issue. Recorded video was just as sharp as the live feed, and two-way audio communications were distortion-free. The internal siren was certainly loud enough to scare away any would-be intruders, and the spotlight did a great job of lighting up an otherwise dark area in my backyard.

When we tested out the accuracy of the motion and contact sensors, we were impressed with how quickly our app registered movement. Opening the door meant that our app automatically showed the “faulted” icon indicating movement – in fact, it was almost instantaneous. Same for the motion detection sensor – the notification on both the hub and the app appeared almost immediately. This was the case whether we were in the house or not. With some devices we’ve tested, particularly with security cameras, there’s often a lapse with notifications. It doesn’t appear to be the case here.
The second issue I have for the system is that there is no quick exit feature. For the entire six years that I've had a security system, I have been used to being able to press a button that will give me one minute to quietly exit the house. This is important when I am leaving for work a few hours before my family wakes up for their day. The Ring system doesn't have this feature at all. When the system is armed, it has to be disarmed (which it announces) and rearmed before exiting with a delay that can be set up with your phone (it will announce this as well and will make a sound while it counts down) or can be armed from your phone after you leave (again, it will announce this with the countdown sound). You either have to chose if you want the system to count down or not. Not counting down will immediately arm it and you will have to arm from your phone if you leave and arm it on the "Home" setting while others are still there. You can adjust the sound that is emitted from the panel so that it isn't loud, but it will also make your door and window chimes use the same volume all of the time. If you have your system armed while you’re home, and the volume is down, you might not hear the system telling you that it needs to be disarmed if you forget and open a door. There is no in-between here. If you have to leave while others are still sleeping, this may be a problem for you.
Enjoy a free 30-day trial of Ring Protect Plus with your purchase! Ring Protect Plus lets you record, save and share all the videos captured by unlimited Ring Doorbells and Cameras at your home. Protect Plus members also get 24/7 professional monitoring with Ring Alarm, exclusive discounts and extended warranties. Activate Ring Protect Plus for only $10 a month, or get video recording and sharing for only $3 a month per each device with Ring Protect Basic.
×