Press Continue and follow the video instructions to press the button at the top of the device, at which point the LED will begin flashing white. Press Continue again and go to your phones Wi-Fi settings to connect to the camera. Return to the app, select your home Wi-Fi from the list, and enter your password. Within seconds the camera will connect and you'll have the option to view a video tutorial that will walk you through the physical installation, or you can skip this step and use the written instructions. In the final step you'll be prompted to define Motion Zones, but you can come back to this later if you prefer.
By default, Ring Alarm offers three modes: Unarmed, Home and Armed, and Away and Armed. You can use the keypad to change modes, or use the mobile app, which also offers access to any Ring cameras you might have set up in your home. The app also provides status updates on any connected devices you have in the house, a separate history log for the alarm system and the cameras, a settings panel for configuring professional monitoring and what each mode does when activated.
Setup of Ring Alarm is quite simple, and the whole process only took me about half an hour, although I used the included adhesive strips to mount sensors and didn't mount the base station and keypad to my walls, so it would have taken a bit longer if I'd gone all-in with hardware mounting options. I may yet do that once I've decided for sure where I want to put the various components.
This is something we remind our four-year-old son of often, as he’s prone to leaving doors open because, well, he’s four. That means that the Disarmed mode comes in handy when he’s awake and running in and out of the house. It’s nice to have three options instead of just the typical “armed” or “disarmed” features that don’t take into account movement that is occurring just by living in the house.
The abode Gateway is responsible for communicating with and controlling all connected devices. Compared to Nest Secure, abode offers a wider array of equipment. Unfortunately, their equipment isn’t as modern looking as Nest’s nor do they offer any multi-purpose devices. However, they do sell everything you need to secure your home. Each Gateway can support up to 150 connected devices and up to six IP Streaming Cameras.
As for the base station, you can hardwire it to your router or connect to it via Wi-Fi. I opted to hardwire it, in hopes that it would provide a more stable connection, considering the importance of it. There is an AT&T SIM card inside of it as well, which is what the system uses as a backup for when your internet connection goes down. The cost of this SIM card and its service is covered in the monitoring plan. Once the base station is powered on and hooked up to your router, you can add it your account.
I’m trying to set my mom up with a constant live feed of their front door. I bought a cloud cam and echo show, before realizing their house isn’t set up to get much of a front door view from the inside. Think a hard wired ring pro with echo show always displaying the live feed would work, or drain the rings battery even though it’s hard wired? Any other ideas? I’d like to keep the echo show, but will probably return the cloud cam.
My gate is too far from my router so I would prefer to hardwire the doorbell. I would rather not use an extender. I ran CAT5 when I installed my old doorbell (which is now outdated and does not have software to use on my iphone). Is my only option the Ring Elite? I have the Arlo set up indoor, but I was not sure if Arlo was going to make a doorbell. Any thoughts?
As a Contributing Editor for PCMag, John Delaney has been testing and reviewing monitors, TVs, PCs, networking and smart home gear, and other assorted hardware and peripherals for almost 20 years. A 13-year veteran of PC Magazine's Labs (most recently as Director of Operations), John was responsible for the recruitment, training and management of t... See Full Bio
All that said, the biggest flaw with price is that purchasing Nest’s multi-purpose sensors may be forcing you to purchase more equipment than you need. Most homes don’t need three motion sensors, especially if the sensors have a decent range. Remember, Nest’s motion detectors only detect movement within a 10-foot range, the abode motion sensor has a 120° field of view and can detect motion within a 34-foot range so you would need at least two Nest motion-enabled devices for every one abode motion sensor. Ring’s motion sensor’s range is unlisted, but I tested it at 35 feet, and it worked perfectly.
Ring Protect retails for $199 for the basic hardware, which is also less than Nest Secure’s $399 entry price. The system also works with all of Ring’s existing products, and will be rolling out support for third-party connected devices over time, too. On its own, it operates as a self-monitored connected security system, sending you alerts while you’re away. The Protect plans starting at $10 monthly include 24/7 monitoring by professionals, as well as unlimited cloud storage for recording from an unlimited number of Ring devices, as well as a 10 percent discount on future Ring hardware purchases.
Ring Doorbell cameras are some of the most popular options on the market today. But, it can be confusing to determine which one is right for your needs (there are quite a few to select from). However, these doorbells are designed to be very reliable, easy to install, and simple to use. They allow you to see, hear, and speak to those people who come to your door. You can access the doorbell camera from your computer, tablet, or through an app on your mobile phone. Here is a look at some of the options.