If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
Ring Chime Pro: For $49, you get a Wi-Fi extender and an indoor chime that lets you know when you have Ring notifications. This accessory is particularly useful if you have a lot of Ring devices in a larger home, as it helps you eliminate Wi-Fi dead spots that could prevent important notifications. You can change the alert tone, adjust the volume and put it on a Do Not Disturb mode. If you just want the chime capability without a Wi-Fi extender, the Ring Chime is $29.
Getting this much capable home security hardware for $199 is an absolute bargain (the system became available for purchase today). Adding door/window sensors for $20 each and motion sensors for $30 is an absolute bargain. Paying $10 a month for professional monitoring and video storage in the cloud for an unlimited number of Ring security cameras is an absolute bargain. Ring Alarm will be a huge hit with people looking for a straightforward, easy-to-use home security system.
It was 20*F outside when I installed the cam. I didn't want to be running up and down a ladder if I had problems connecting to the network. I wired the cam up with a plug (from an old, grounded extension cord) and ran the wifi setup routine at my kitchen table. I verified everything was working (including the app, motion detection, etc.) before I installed it outside.
×